Financial Group Legal Taiwan potential electronic testing center
Telecommunications tube RF device material type identification
Cheng photo word: type word AB
, Applicant : Taiwan Qian-Soni Interactive Entertainment Co., Ltd
, Ground
Address : 19, songgao road, Xinyi, Taipei City
Third, the system
Manufacturer: Sony Interactive Entertainment Inc.
Fourth, the material name draft : PlayStation 5
Five, hemp
Brand: SONY
Six, Type
: CFI-1018B
Tian electric
Heavy
Specialty
Seven, emission power ( electric field strength ):2.402-2.480 GHz: 3.62 dBm, 2.412-2.462 GHz: 23.57 dBm
5.180-5.240 GHz:11.24 dBm, 5.260-5.320 CHz:11.36 dBm, 5.180-5.240 GHz: 11.24 dBm, 5.260-5.320 CHz: 11.36 dBm
5.500-5.700 GHz: 11.56 dBm, 5.745-5.825 GHz:11.42 dBm, 5.745-5.825 GHz: 11.42 dBm
, Operating frequency : 2.402-2.480 GHz (FHSS 79CH,GFSK 40CH)
2.412-2.462 GHz (DSSS, OFDM 11ch), 2.412-2.462 GHz (OFDM 20m Mode-11ch), 2.412-2.462 GHz (OFDM 20m Mode-11ch), 2.412-2.462 GHz (OFDM 20m Mode-11ch、
40M Mode-7CH), 2.412-2.462 GHz (OFDMA 20M Mode-TiCH), 2.412-2.462 GHz (OFDMA 20M Mode-TiCH)
5.180-5.240 GHz (OFDM 4CH), 5.180-5.240 GHz (OFDM 20m Mode-4ch), 5.180-5.240 GHz (OFDM 20m Mode-4ch), 5.180-5.240 GHz (OFDM 20m Mode-4ch、
40M Mode-2CH, 80M Mode-1ch) 5.180-5.240 GHz (OFDMA 20M Mode-4CH) 5.180-5.240 GHz (OFDMA 20m Mode-4ch) 5.180-5.240 GHz (OFDMA 20m Mode-4ch)
40M Mode-2CH, 80m Mode-1ch)
5.260-5.320GHz (OFDM 4CH) 5.260-5.320GHz (OFDM 20M Mode-4CH、
40M Mode-2CH, 80m Mede-1ch), 5.260-5.320 GHz (OFDMA 20M Mode-4CH), 5.260-5.320 GHz (OFDMA 20m Mode-4CH), 5.260-5.320 GHz (OFDMA 20m Mode-4CH、
40M Mode-2CH, 80m Mode-1ch)
5.500-5.700 GHz (OFDM 11ch), 5.500-5.700 GHz (OFDM 20m Mode-11ch), 5.500-5.700 GHz (OFDM 20m Mode-11ch), 5.500-5.700 GHz (OFDM 20m Mode-11ch、
40M Mode-5CH, 80M Mode-2CH), 5.500 - 5.700 GHz (OFDMA 20M Mode-11CH), 5.500-5.700 GHz (OFDMA 20m Mode-11CH), 5.500-5.700 GHz (OFDMA 20m Mode-11CH、
40M Mode-5ch, 80m Mode-2CH)
5.745-5.825 GHz (OFDM 5CH), 5.745-5.825 GHz (OFDM 20m Mode-5CH), 5.745-5.825 GHz (OFDM 20m Mode-5CH), 5.745-5.825 GHz (OFDM 20m Mode-5CH 、
40M Mode-2CH, 80M Mode - ICH)-5.745-5.825 GHz (OFDMA 20M Mode-5CH) - 5.745-5.825 GHz (OFDMA 20m Mode-5CH) - 5.745-5.825 GHz (OFDMA 20m Mode-5CH)
40M Mode-2CH, 80m Mode-1ch)
9. date of trial : September 18, 109
Ten, the examination of the standard type (((((CCAB20) P129AT2
, Warning or marking requirements: (equipment burning, manual use, packaging gold, etc., in accordance with the following marking requirements )
1, telecommunications tube RF equipment to obtain the customer test, cast mold use and other test conformity standard or compliance standard cover, in accordance with the following provisions , the beginning of the information :
(1) this Ming marked the customer test qualified standard or fit Ming standard and gold marked the main pipe machine to open the standard car. The final product of the Ming: face consideration standard
The Test name of the RF module ( component ) and the final product type gold mark of the main pipe machine Mark.
(2) according to the master or related technical specifications, specify the location to indicate the positive power (Chinese) warning.
2, inter-network network Road trafficking information telecommunications management radio frequency equipment deer inter-network Network road network shows its type and audit insurance qualification standard or compliance meal standard audio message.
3, use the manual to mark the following responsibility machine :
Low-power RF devices obtained by the audit of insurance are not dance approved, the company , business or user are not allowed to pull from the more frequency. Add power Feng or more original design features and power
Can . The use of low-power RF devices does not affect flight safety and communication ; when there is a dry broadcast phenomenon , it is immediately discontinued and improved until there is no dry broadcast.
Weaving horizontal use . The foregoing legal communication refers to wireless communication operated in accordance with the provisions of the telecommunications Management Act. Low-power RF devices shall be subject to legal communication or industrial, coping and therapeutic use
Thousands of electrical wave amplitude radiating Motor Equipment.
12. special record items :
1, to obtain the verification of the telecommunications tube RF equipment or non-plug-in that is used RF module (components ) , but also the original applicant , card , type , hard, RF function , external pro 、
In the case of color , material , power supply mode, accessories or antenna, deer re-apply for inspection, except as otherwise provided by the telecommunications control RF material inspection method.
2, telecommunications control RF equipment or non-plug-and-use RF module ( components) to obtain the examination of the inter-phase technical specifications correction , re-application of the customer to lose , in
Please re-test, and may use the original test conformity mark or conformity mark . Failure to re-test in accordance with the provisions , the main machine compartment or the original inspection organization may stop its inspection.
3, to obtain the type of recognition , compliance wall Ming: Ming, On Shan Bao tube to apply for customer inspection of the telecommunications tube RF equipment or non-plug-and-use RF
Module (component), external power supply, accessories , external antenna , cool test report or test report match Test fixture and guest Test Root report or test report use the same version
The test is taught until five years after the device is stopped or the wheel is stopped.
4, to obtain the type of proposal or compliance with the school Ming Ming cast mode other people with the system of radio frequency equipment or non-plug-and-play radio frequency module (component ) use things
Certification standard or compliance standard, applied by the person who obtained the certification record or commissioned the original inspection machine
5, in order to obtain the spring test of the complete RF module ( component ) assembled into a complete final product to obtain the complete RF module ( component ) of the examination and insurance Ming , willing to price so completely
Before selling the final product , check the electronic case of the complete final product Hemp brand, type and appearance photo and register it with the original inspection machine ( structure) ・ with a complete RF module ( group
After the complete radio frequency module ( component ) is assembled into the final product , the complete radio frequency module (component) is obtained
The sender of the group ( component ) is willing to attach the electronic cable marked with the complete final product brand , type and external photo, to the original inspection machine ( structure ) registration
Page 1 of 2
CCAB20LP129AT2