Support NeoGAF

[IbizaPocholo]

Instructions to get this to work : (do not attempt this unless you're good at soldering/linux/etc)

1. Cross-compile fbDOOM for ARM - https://github.com/maximevince/fbDOOM
2. Put it on a USB stick alongside DOOM.WAD from the shareware release (or full version if you like)
3. Connect a 3.3v UART to port CN1002 on the main PCB (1=3.3v, 2=TXD, 3=RXD, 4=GND)
4. Get Root ( https://twitter.com/G33KatWork/status... )
5. kill rbp
6. run fbDOOM from the usb stick (it gets mounted in /media/usbx/sda1)

 

[Fermbiz]

Thats pretty cool! I wonder if they can get it to run on the Traktor Kontrol S4 MK3

 

[Ragnarok]

No playing with the actual turntables, no care.